Products
If you are not 100% satisfied with your purchase, you my return it within 30 days of the date of purchase for a refund. We also aim to respond no later than 24 hours, to any customer concerns.
Browse
Gnatrol Gnat Control WDG (4lb Pale)
OMRI LISTED: Contains Bt israelensis which has excellent activity against the larvae of fungus gnats. 16lb bucket makes more than 10 gallons of the liquid formula, more economical to ship and has an extended 2 year shelf life.
[Product Details...]
$0.00
|
Olsen O-Jet Riser Tube (6 Inch)
This 0.25 in Riser Tube raises the level of O-Jets. Must also purchase 0.25 in threaded barbs. Can also be used with mini sprinklers built-in internal barb.
[Product Details...]
$0.07
|
Olsen O-Jet Riser Tube (8 Inch)
This 1/4in Riser Tube raises the level of O-Jets. Must also purchase 1/4in threaded barbs. Can also be used with mini-sprinkler's built-in internal barb.
[Product Details...]
$0.08
|
Olsen O-Jet Riser Tube (12 Inch)
This 1/4in Riser Tube raises the level of O-Jets. Must also purchase 1/4in threaded barbs. Can also be used with mini-sprinkler's built-in internal barb.
[Product Details...]
$0.13
|
1/8in Barbed Coupler
Attaches 1/8in tubing to 1/2in poly tubing. The end of the coupler inserts into the end of the 1/8in tubing and the other end of the coupler pokes through the wall of the 1/2in poly tubing. Also used with the Aquatic Tri-Tip Sprayers.
[Product Details...]
$0.15
|
1/4in Threaded Barb for Olsen O-Jet Riser Tubes
Attaches the Olsen O-Jet Riser Tube directly to a 1/2" poly tubing irrigation line.
[Product Details...]
$0.17
|
Olsen O-Jet Riser Tube (18 Inch)
This 1/4in Riser Tube raises the level of O-Jets. Must also purchase 1/4in threaded barbs. Can also be used with mini-sprinkler's built-in internal barb.
[Product Details...]
$0.18
|
Olson O-Jet Spayer - 300 Degree Blue
Flow rates of 7.0 GPH spraying 7ft at 10 PSI. Used for ground covers that need full water coverage. The deflection cap causes a fan type spray pattern which saturates the area at a lower pressure than other sprinklers.
[Product Details...]
$0.19
|
Olson O-Jet Spayer - 180 Degree Red
Flow rates of 18.2 GPH spraying 11ft at 10 PSI. Used for ground covers that need full water coverage. The deflection cap causes a fan type spray pattern which saturates the area at a lower pressure than other sprinklers.
[Product Details...]
$0.19
|
Olson O-Jet Spayer - 180 Degree Blue
Flow rates of 7.0 GPH spraying 7ft at 10 PSI. Used for ground covers that need full water coverage. The deflection cap causes a fan type spray pattern which saturates the area at a lower pressure than other sprinklers.
[Product Details...]
$0.19
|
Olson O-Jet Spayer - 90 Degree Black
Flow rates of 4.4 GPH spraying 7ft at 10 PSI. Used for ground covers that need full water coverage. The deflection cap causes a fan type spray pattern which saturates the area at a lower pressure than other sprinklers.
[Product Details...]
$0.19
|
Olson O-Jet Spayer - 300 Degree Black
Flow rates of 4.4 GPH spraying 6ft at 10 PSI. Used for ground covers that need full water coverage. The deflection cap causes a fan type spray pattern which saturates the area at a lower pressure than other sprinklers.
[Product Details...]
$0.19
|
Heavy Duty 1/4in Barbed Coupler
Attaches 1/4in tubing to 1/2in poly tubing. One end of the coupler inserts into the opening of the 1/4in poly tubing and the other end of the coupler pokes through the wall of the 1/2in poly tubing.
[Product Details...]
$0.19
|
Olson O-Jet Spayer - 180 Degree Black
Flow rates of 4.4 GPH spraying 6ft at 10 PSI. Used for ground covers that need full water coverage. The deflection cap causes a fan type spray pattern which saturates the area at a lower pressure than other sprinklers.
[Product Details...]
$0.19
|
Olson O-Jet Spayer - 90 Degree Red
Flow rates of 18.2 GPH spraying 18ft at 10 PSI. Used for ground covers that need full water coverage. The deflection cap causes a fan type spray pattern which saturates the area at a lower pressure than other sprinklers.
[Product Details...]
$0.19
|
Olson O-Jet Spayer - 90 Degree Blue
Flow rates of 7.0 GPH spraying 10ft at 10 PSI. Used for ground covers that need full water coverage. The deflection cap causes a fan type spray pattern which saturates the area at a lower pressure than other sprinklers.
[Product Details...]
$0.19
|
Olson O-Jet Spayer - 300 Degree Red
Flow rates of 18.2 GPH spraying 10ft at 10 PSI. Used for ground covers that need full water coverage. The deflection cap causes a fan type spray pattern which saturates the area at a lower pressure than other sprinklers.
[Product Details...]
$0.19
|
Barbed Coupler 1/4in
Attaches 1/4in tubing to 1/2in poly tubing irrigation line. One end of the coupler inserts into the opening of the 1/4in tubing and the other end of the coupler pokes through the wall of the 1/2in poly tubing. Also used to connect mini-sprinklers to poly
[Product Details...]
$0.19
|
Barbed Elbow 1/4 Inch
Attaches to 1/4in tubing to make a 90 degree angle.
[Product Details...]
$0.25
|
Short Stake For 1/4in Poly Tubing
With its pointed end stuck into the ground, it holds 1/4in poly tubing in securely to the ground.
[Product Details...]
$0.29
|
Olson Ultra Jet Sprayer - 180 Degree Blue
Flow rates of 6.8 GPH spraying 10ft at 10 PSI. These are used for ground covers, under trees and areas needing moderate water supplies. The jets send out streams of water in 180 degree and 360 degree directions based on the type of sprayer.
[Product Details...]
$0.39
|
Olson Ultra Jet Sprayer - 180 Degree Black
Flow rates of 4.5 GPH spraying 8ft at 10 PSI. These are used for ground covers, under trees and areas needing moderate water supplies. The jets send out streams of water in 180 degree and 360 degree directions based on the type of sprayer.
[Product Details...]
$0.39
|
Olson Ultra Jet Sprayer - 360 Degree Blue
Flow rates of 6.8 GPH spraying 11ft at 10 PSI. These are used for ground covers, under trees and areas needing moderate water supplies. The jets send out streams of water in 180 degree and 360 degree directions based on the type of sprayer.
[Product Details...]
$0.39
|
Olson Ultra Jet Sprayer - 360 Degree Red
Flow rates of 17.6 GPH spraying 16ft at 10 PSI. These are used for ground covers, under trees and areas needing moderate water supplies. The jets send out streams of water in 180 degree and 360 degree directions based on the type of sprayer.
[Product Details...]
$0.39
|
Screw Cap 1/2 Inch
Screw cap as a spare or replacement for the one that comes with the 1/2 inch end cap. Comes with washer.
[Product Details...]
$0.39
|
Olson Ultra Jet Sprayer - 180 Degree Red
Flow rates of 17.6 GPH spraying 17ft at 10 PSI. These are used for ground covers, under trees and areas needing moderate water supplies. The jets send out streams of water in 180 degree and 360 degree directions based on the type of sprayer.
[Product Details...]
$0.39
|
Olson Ultra Jet Sprayer - 360 Degree Black
Flow rates of 4.5 GPH spraying 7ft at 10 PSI. These are used for ground covers, under trees and areas needing moderate water supplies. The jets send out streams of water in 180 degree and 360 degree directions based on the type of sprayer.
[Product Details...]
$0.39
|
Compression Nut 1/2 Inch
Extra compression ends for adapting or repairing poly fittings or new style Aquapore fittings.
[Product Details...]
$0.39
|
Olson Stabilizer Base For Mini-Sprinklers
Use this to screw the Olson Clamp into so it stabilizes the mini-sprinkler assembly to the ground. Use our U shaped metal ground staples to secure this base to the ground.
[Product Details...]
$0.49
|
O-Jet Sprayer Spike Stake
These 5in Spike Stake allows flexible and secure installation of O-Jet Sprayers on the 1/4in Olsen risers by combining stake support with water flow. The barb on the side of the stake allows connection to irrigation line.
[Product Details...]
$0.49
|
Mini-Flo Inline Emitter (Black)
For 1.0 gph flow rates. These Inline emitters each have two 1/4in barbed ends which can be installed along 1/4in poly tubing. Distances between emitters may be customized to meet whatever needs you have.
[Product Details...]
$0.59
|
Mini-Flo Inline Emitter (Red)
For 0.5 gph flow rates. These Inline emitters each have two 1/4in barbed ends which can be installed along 1/4in poly tubing. Distances between emitters may be customized to meet whatever needs you have.
[Product Details...]
$0.59
|
Irrigation Stake for 1/4in Tubing (12 inches)
Supports 1/4in poly tubing with O-Jets, Ultra-Jets or Mini-Sprinklers. Attach 1/4in poly tubing to 1/2in poly with 1/4in Threaded Barbs. Gives greater flexibility in positioning sprayers.
[Product Details...]
$0.65
|
Tape-Loc 1/4in Barbed Fitting
The barbed end pushes into the main poly tubing irrigation line and then the other side with the Tape-Loc sleeve connects the T-Tape.
[Product Details...]
$0.69
|
Aquatic Tri-Tip Sprayer
This Ingenious device provides three standard flow rates and a 4.75in stake in one unit. Three flow tips deliver low (4.8 gph), medium (7.8 gph) and high (10.8 gph) flows at 10 psi.
[Product Details...]
$0.69
|
Tape-Loc 1/2in Barbed Fitting
Inserts into the end of 1/2in poly tubing irrigation line to join the T-Tape to the end of the line.
[Product Details...]
$0.69
|
Power-Loc 3/4in Male Starter Fitting
3/4in Male Hose Starter Fitting. This fitting connects the 1/2in poly tubing to a female hose thread (at the end of your watering hose)
[Product Details...]
$0.79
|
Vari-Flow 1/4inch In-Line Valve
Attaches to 1/4 inch tubing to adjust the flow rate and turn off the water supply in the line.
[Product Details...]
$0.79
|
Shrubbler 360 Degree Adjustable Sprayer
When the cap is rotated, the flow and radius adjust from a gentle stream pattern, to drip and finally shut off. The adjustable spray head is permanently mounted on a 4.5in riser stake for watering shrubs and trees.
[Product Details...]
$0.89
|
Olson Riser for Mini-Sprinklers
Use this in conjunction with the Olson Clamp (IRR628) and the Olson Stabilizer Base (IRR620. You can also screw together for additional height, each one will raise the sprinkler by 6 inches.
[Product Details...]
$0.89
|
Power-Loc 1/2in Irrigation Line Coupler
This fitting joins two pieces of your 1/2in poly tubing irrigation line together. Used to extend pipe or to make repairs.
[Product Details...]
$0.99
|
Aquapore Barbed End
Inserts into the end of new style Aquapore soaker hose to end the irrigation line.
[Product Details...]
$0.99
|
Olson Clamp for Mini-Sprinklers
This clamp pierces a hole directly into your irrigation tubing and transfers water up through the riser to the mini-sprinkler. Use this clamp in conjunction with the Olson Riser and the Olson Stabilizer Base.
[Product Details...]
$0.99
|
Aquapore / Poly Tubing 1/2in Coupler
Joins two pieces of Aquapore or poly tubing together. Can add to or repair irrigation system.
[Product Details...]
$0.99
|
PVC 1/2in Starter Fitting
This fitting is used to attach your 1/2in poly tubing irrigation pipe to a 1/2in threaded PVC pipe.
[Product Details...]
$0.99
|
Low Flow Flush Valve 1/2in
Attaches to male hose thread. When the water pressure gets above 0.6 GPM the valve closes. The valve will reopen when pressure falls below 1 PSI.
[Product Details...]
$1.09
|
Olson Mini-Sprinkler (Black)
For LOW Flow Rates. This mini-sprinklers wing-style rotor provides a broad throw pattern with even water distribution. Use the Olson Mini-Sprinklers in situations where you need large diameter, full-circle water coverage.
[Product Details...]
$1.09
|
Aquapore / Poly Tubing Starter Fitting
Attaches hose spigot or filter and pressure system to new style Aquapore or 1/2in poly tubing irrigation line.
[Product Details...]
$1.09
|
Olson Mini-Sprinkler (Red)
For HIGH Flow Rates. This mini-sprinklers wing-style rotor provides a broad throw pattern with even water distribution. Use the Olson Mini-Sprinklers in situations where you need large diameter, full-circle water coverage.
[Product Details...]
$1.09
|
Last Updated: Wednesday, 10 March 2010 05:58
