Poly Tubing 1/4 Inch and Fittings
�.25in_poly_s.jpg
1⁄4" poly tubing is used to branch off of 1⁄2" poly tubing to supply water to individual plants. You attach one end of the 1/4" tubing to the 1/2" poly tubing with a barbed connector, and the other end to an emitter that will spray water out at your plants.
 
TIP: Avoid using 1⁄4" poly tubing to feed too many emitters along the same line of tubing, as water flow at the end of each emitter will be reduced. Try to use  separately branching off 1⁄2" poly for more consistent water pressure

Poly Tubing 1/4 Inch and Fittings

Results 1 - 4 of 4

Barbed Coupler 1/4" Irrigation Fitting (Bag of 100)

Attaches 0.25" tubing to 0.5" poly tubing or joins 2 pieces of 0.25". One end of the coupler inserts into the opening of the 0.25" poly tubing and the other end of the coupler pokes through the wall...
 
Sales price: $3.49
SKU: BB14C
 
 
 
 
 

Barbed Tee 1/4" Irrigation Fitting (Bag of 100)

Attaches to 0.25" tubing to together to make a 3-way connection.Ideal for creating spurs in the irrigation tubing for example where you might want to come down into a plant pot or to put an emitter.
 
Sales price: $6.99
SKU: BB14T
 
 
 
 
 

Toro Irrigation 1/4in Poly Tubing (100' Roll)

Toro's micro distribution tubing is 1/4", constructed of LDPE, and designed to distribute water to precise locations. The 1⁄4" or 4mm poly tubing is typically used in an irrigation settting to branch...
 
Sales price: $12.99
SKU: PT14-1
 
 
 
 
 

Toro Irrigation 1/4in Poly Tubing (1000' Roll)

Toro's micro distribution tubing is 1/4", constructed of LDPE, and designed to distribute water to precise locations. The 1⁄4" or 4mm poly tubing is typically used in an irrigation settting to branch...
 
Sales price: $69.99
SKU: PT14-2