Agtec Economy Grass and Patio and Parking Pavers - 19in x 19in (Pallet Quantity)

$9.99
In stock
SKU
AGT-PTPVR

Agtec Grass and Gravel Pavers are the perfect product for reinforcing grassy or gravel areas. They hold material in place and the rugged hexagonal design supports the weight of traffic above it. Minimum order qty 50. FREE SHIPPING*.

  • Buy 180 for $8.99 each and save 10%

Agtec Grass and Patio Pavers - Pallet Quantity

(19.7" x 19.7" x 2")

Features:

  • Paver size: 19.7in (50cm) x 19.7in (50cm)  x 2in (5cm) – Four pavers covers 1 square meter (10.7 sq.ft)
  • Each paver covers 2.645 sq.ft. A pack of 10 covers 26.45 square feet
  • Four pavers covers 10.7 sq.ft
  • 180 Pavers per pallet
  • Green color to blend in with turf
  • Ideal for supporting base beneath patio
  • Tongue and groove locking system to join pavers together
  • Hexagon design stronger than circle or square designs
  • Has a compression strength of up to 200 ton/sq.m to support very heavy loads
  • Load bearing pillars at the points of each cell for added strength
  • Holds material in place and reduces erosion and runoff
  • Made of 100% recycled plastic
  • Minimum order quantity 50
  • FREE SHIPPING* TO LOWER 48 US STATES

Agtec Grass and patio pavers are the perfect product for reinforcing grassy areas that are subject to high traffic and need erosion and load bearing support.

The patio pavers strong hexagonal cell design holds the weight of the traffic above it whilst simultaneously holding the fill in place so that it does not move laterally and creates a solid stable surface that does not shift.

The pavers do not rely on the fill alone to bear the weight above it so it is perfect for stabilizing patio areas so the stones do not settle and crack the stones over time.

These pavers are also perfect for creating heavy duty gravel support areas. These pavers not only hold the gravel in place but they also add to the strength of the gravel making it ideal for extremely heavy traffic areas such as a construction sites or firelanes. 

These pavers are ideal for use on grass roads, patios, stone walkways, grass car parks, fields, golf clubs, equestrian parks, driveways, atv trails, boat access areas and anywhere that the grass or gravel areas needs heavy duty reinforcement.

We recommend installing a geotextile fabric beneath the grids to provide additional separation, stability, reinforcement and weed control, and to help prevent sinking over time. Non woven geotextiles allow water to pass through very quickly and should be used in areas where rapid drainage is important. For other areas, a woven ground cover is also suitable.

Installation for grass:

  • Prepare ground by removing old soil and debris.
  • Grade and compact existing soils with tamper.
  • Preferably install some of our drainage fabric or ground cover to separate layers of material.
  • Add 4-6” of base rock (Aashto No.57 stone) for drainage and stability.
  • Install drainage fabric or ground cover over rocks for separation, stability and reinforcement.
  • Position grass pavers and pin into place with anchor pins (cut grass pavers with reciprocating saw if necessary).
  • Fill grass pavers with good soil.
  • Either top the pavers with sod or top with a thin layer of soil and add grass seeds. 

Installation with gravel:

  • Prepare ground by removing old soil and debris.
  • Grade and compact existing soils with tamper.
  • Preferably install some of our drainage fabric or ground cover to separate and reinforce layers of material.
  • Add 8” of base rock (Aashto No.57 stone) for drainage and stability.
  • Install drainage fabric or ground cover over rocks.
  • Position pavers and pin into place with anchor pins (cut with reciprocating saw if necessary).
  • Fill pavers with gravel and top with 1/2" layer.

Paver weight: 3.5lb each

*Free shipping to commercial addresses without liftgates. Residential and rural areas may incur a shipping surcharge.

Installation for grass or gravel:

  • Prepare ground by removing old soil and debris.
  • Grade and compact existing soils with tamper.
  • Preferably install drainage fabric or ground cover to separate layers of material.
  • Add 4-6” of base rock (Aashto No.57 stone) for drainage and stability. (Add an additional 2" of base rock for gravel installations)
  • Install drainage fabric or ground cover over rocks so the soil doesn’t wash away.
  • Position grass pavers and pin into place with anchor pins (cut grass pavers with reciprocating saw if necessary).
  • For Grass Areas: Fill grass pavers with good soil and top the pavers with either sod or a thin layer of soil and add grass seeds.
  • For Gravel Areas: Fill pavers with gravel and top with 1/2" layer.

 

pdf
(Size: 372.9 KB)
The spec sheet for the Grass and Gravel Pavers
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account