Agtec Trellis Support Netting 80in x 3280ft Roll

$329.99
In stock
SKU
AT-TSN80X3280

Agtec trellis netting can be used as a vertical or horizontal support for crops and flowers as they grow. Very thin 8g/sqm yet extremely strong. UV Stabilized for long life. Mesh size approx 6" x 7".

  • Buy 10 for $296.99 each and save 10%
  • Buy 20 for $263.99 each and save 20%

Agtec Trellis Support Netting 80" x 3280' Roll

Features:

  • 80" x 3280' (2m x 1000m)
  • UVA stabilized polypropylene
  • Double reinforced edges for strength, edge visibility support cable attachment
  • Chemical resistance
  • Light in weight - easy to handle
  • Thin 8g/sqm but very strong
  • Tear-resistant
  • Provides better exposure to light and air
  • Use with Agtec monofilament cable for additional support
  • Mesh size approximately 6" x 7"

Agtec trellis support netting is a great value trellis netting that can be used either vertically to support your plants or horizontally in multiple layers so your plants can grow through the netting and be supported as it grows.

This UV stabilized poly is long lasting, economical and encourages growth. This netting improves air circulation, exposure to the sun and use of space allowing for easy harvesting. Manufactured with high quality polypropylene, this netting is lightweight, robust, flexible,  UV stabilized and resistant to bacteria, chemicals and mold. Use with Agtec monofilament cable and accessories for additional support  and easy tensioning.


Unit Ship Weight: 46 lbs


Vertical Installation
 
To install Agtec trellis support netting vertically you would put support posts down your rows at approximately every 24' apart. Then you attach netting to the support posts using string or twine. Next snake a support cable such as monofilament support wire (available separately) or other strong cable or string through the netting at the top to support the netting. Then simply tie your plants to it as they grow. This netting is very versatile and you could be inventive such as making vertical cages.
 
Horizontal Installation
 
To install the Agtec trellis netting horizontally for larger crops such as tomatoes where you would need only 1 or 2 layers you could install the netting over a poly tunnel or a similar frame and simply allow the plant to grow through the netting. The netting is very versatile and there is many ways you can install this to support your plants such as putting over a hoop house or tunnel so that the crops beneath them grow through.
 
For smaller plants such as flowers you would need several layers that are close together. First start by putting 4  wood or metal posts in the ground. The first 2 should be placed in the ground the width of your netting, the second 2 should be placed 6 - 20' away. The height of the posts would depend on what you are growing.
 
Next screw or bolt wooden cross bars between the posts 1 and 2 and also between posts 3 and 4 at the different heights you are going to space your layers of  trellis support. This will depend on how tall your plants grow.
 
Next attach your netting to the cross bars by wrapping them around the cross bar and then tying string or zip ties around the netting and cross bar to hold in place. 
 
Next unroll the trellis support netting and attach to the cross bars between posts 3 and 4. You can continue the row by putting support posts and cross bars every 20' apart and make the layer as long as you want. Then do the next layer the same way.
 
You may be advised to strengthen the edges with monofilament or string to stop the edges from sagging.  Your plants should now be very well supported as they grow up through between the layers.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account