Horiba Lead Ion Electrode – 8008-10C
This electrode determines the lead ion concentration in aqueous solutions. It has a measurement range of 2 to 20,000 mg/L Pb2+.
Horiba Lead Ion Electrode – 8008-10C
The Horiba Lead Ion Electrode determines the lead ion concentration in aqueous solutions. It requires a 2565A-10T reference electrode to function properly and can be used with most Horiba water testing meters. Lead is a dangerous substance even at low concentrations which should be monitored whenever possible.
Horiba sensors and electrodes are among the highest quality in the world. They are made with top quality components and are designed to provide accurate, dependable results.
Specifications:
Measuring range |
2 to 20,000 mg/L Pb2+ |
pH range |
20 mg/L (10-4 mol/L) Pb2+ |
Applicable temperature range |
0 to 50℃ |
Response time (90%) |
Within 10 seconds |
Applicable reference electrode |
2565A |
Selection coefficient |
Cu2+、Hg2+、S2-、Ag+ = Not acceptable Fe3+ = 0.01 Cr3+ = 1 Cd2+ = 10 Ni2+、Mg2+、Zn2+ = 100 NH4+、K+ = 1,000 |
• The response time is the time which is required to reach 90% response when the ion concentration is gradually changed from 10-4 mol/L to 10-2 mol/L with the solution stirred.
Exception:
*1: 90% response when ion concentration is changed to 10-6 mol/L ∼ 10-2 mol/L
*2: 95% response when ion concentration is changed to 10-3 mol/L ∼ 10-1 mol/L
*3: 95% response when ion concentration is changed to 10-4 mol/L ∼ 10-2 mol/L
*4: 95% response when ion concentration is changed to 10-4 mol/L ∼ 10-1 mol/L
• The selection coefficient is a ratio of the limit concentration of coexisting ions (mol/L) to the ion concentration to be measured (mol/L); The value of 1000 means that the coexisting ions can be permitted up to 1000 times the ion measured and ''not acceptable'' means that chemical change occurs in the solid response membrane.
Note: This electrode does not work with the Horiba D-53 meter.
Unit Ship Weight: 1 lb