Misting Systems and Accessories

Here is where we sell all the kits and accessories necessary to complete your greenhouse misting system. Greenhouse misting is an important for any greenhouse for controlling the temperature and humidity for your plants. Proper misting will ensure good humidity in your greenhouse and ensure a comfortable and healthy environment for all your plants.

When evaporation uses up heat it turns water into a gas from a liquid. Because of greenhouse venting much of the needed moisture is lost when it escapes into the air.This is where greenhouse misting comes in because it can replace the moisture that is lost. Misting can also lower the temperatures by as much as twenty-five degrees F in your greenhouse which is about 14 degrees Celsius.

Greenhouse misting is affected by several factors such as the level of ventilation and shading and also the local climate and weather conditions. The fluctuations in daily weather will make a difference in how much moisture is needed, too. A greenhouse misting system is great for ensuring that whatever your conditions, the humidity levels are at optimum.

Misting Systems and Accessories

Results 1 - 19 of 19

DGT Nozzle Riser Adapter 3/8”BSW to 1/2”FPT

These DGT Nozzle Riser adapters will allow you to connect your DGT nozzles to a 1/2" PVC misting riser.There are 2 adapters available depending on whether you have a threaded riser or a non-threaded...
 
Sales price: $1.99
SKU: PHY-3020
 
 
 
 
 

DGT Nozzle Riser Adapter 3/8”BSW to 1/2" Slip

These DGT Nozzle Riser adapters will allow you to connect your DGT nozzles to a 1/2" PVC misting riser.There are 2 adapters available depending on whether you have a threaded riser or a non-threaded...
 
Sales price: $1.99
SKU: PHY-3021
 
 
 
 
 

Misting Riser Support Brace

This Galvanized riser support brace is used for installing a misting riser on top of flat ground or a solid surface. It will help stabilize your misting system and will hold your risers in place for...
 
Sales price: $3.69
SKU: PHY-3200
 
 
 
 
 

1/2" PVC Misting Riser 18" Threaded Both Ends

These high quality PVC risers are designed to raise up your misting nozzles above the level of you PVC irrigation pipe. Use this riser if either the irrigation pipe you are connecting too or the...
 
Sales price: $4.49
SKU: PHY-7033
 
 
 
 
 

DGT Upright Misting Nozzles, Choice of Colors, 3/8" BWT

The DGT Upright Nozzles are high quality misting nozzles that will provide a consistent, light mist to your greenhouse plants and flowers. These nozzles are high quality and long lasting. Choice of 4...
 
Sales price: $5.19
SKU: PHY-3001_
 
 
 
 
 

1/2" PVC Misting Riser 18" Threaded One End

These high quality PVC risers are designed to raise up your misting nozzles above the level of you PVC irrigation pipe. Use this riser if either the irrigation pipe you are connecting too or the...
 
Sales price: $5.49
SKU: PHY-7003
 
 
 
 
 

DGT Invertible Misting Nozzles, Choice of Colors, 3/8" BWT

The DGT invertible Nozzles are high quality misting nozzles that will provide a consistent, light mist to your greenhouse plants and flowers. These nozzles are high quality and long lasting. Choice...
 
Sales price: $7.39
SKU: PHY-3000_
 
 
 
 
 

Automatic Irrigation Drain Valve 1/2" Thead

This Automatic Drain Valve can be used with your irrigation system to drain water lines, reduce pressure and lessen dripping. This valve is very effective and requires less than 5 P.S.I. for pressure...
 
Sales price: $11.99
SKU: PHY-3590
 
 
 
 
 

Baumac ULV Extra-Fine Misting And Fogging Nozzles

The Extra Fine Fog Nozzles are ultra-low volume misting nozzles that will produce a thick misty fog for your greenhouse plants. They use about 0.8 GPH when operating at 40 P.S.I. and approximately...
 
Sales price: $12.49
SKU: PHY-3118
 
 
 
 
 

Baumac ULV Medium Misting And Fogging Nozzles

The Baumac ULV Medium Fog Nozzles are misting nozzles that will produce a thick, fog like mist in your greenhouse. They produce a medium mist that will use 1.4 GPH at 40 P.S.I. and 2.21 GPH at 100...
 
Sales price: $12.49
SKU: PHY-3122
 
 
 
 
 

Baumac ULV Coarse Misting And Fogging Nozzles

The Baumac ULV Coarse Fog Nozzles produce a thick, wet fog for your greenhouse that is great for cooling and humidity control in your greenhouse. When operating at 40 P.S.I. they use 2.13 GPH and at...
 
Sales price: $12.49
SKU: PHY-3124
 
 
 
 
 

DGT Misting Nozzle Replacement Pins (Pack of 10)

These pins replace broken or worn out pins in the DGT upright or invertible misting nozzles. The DGT Upright Nozzles are high quality and effective misting nozzles that will effectively mist your...
 
Sales price: $14.99
SKU: PHY-3009
 
 
 
 
 

DGT Misting Nozzle Bushings, For installing Misters (pack of 50)

Use these bushings to install the DGT upright and invertible misting nozzles into your PVC Pipe. simply drill PVC pipe with 7/16 inch drill bit. Place this nozzle adaptor and into the hole and screw...
 
Sales price: $24.99
SKU: PHY-3022
 
 
 
 
 

Phytotronics Misting Kit, 25' with 1/2” PVC

These Misting Kits have everything you will need to set up an effective misting system in your greenhouse. Each kit comes complete with pre-drilled PVC piping, cement, wire, valves, filters, nozzles...
 
Sales price: $229.99
SKU: PHY-1300
 
 
 
 
 

Phytotronics Misting Kit, 50' with 1/2” PVC

These Misting Kits have everything you will need to set up an effective misting system in your greenhouse. Each kit comes complete with pre-drilled PVC piping, cement, wire, valves, filters, nozzles...
 
Sales price: $319.99
SKU: PHY-1305
 
 
 
 
 

Phytotronics Misting Kit, 75' with 1/2” PVC

These Misting Kits have everything you will need to set up an effective misting system in your greenhouse. Each kit comes complete with pre-drilled PVC piping, cement, wire, valves, filters, nozzles...
 
Sales price: $389.99
SKU: PHY-1310
 
 
 
 
 

Phytotronics Misting Kit, 100' with 3/4” PVC

These Misting Kits have everything you will need to set up an effective misting system in your greenhouse. Each kit comes complete with pre-drilled PVC piping, cement, wire, valves, filters, nozzles...
 
Sales price: $459.99
SKU: PHY-1315
 
 
 
 
 

Phytotronics Misting Kit, 125' with 3/4” PVC

These Misting Kits have everything you will need to set up an effective misting system in your greenhouse. Each kit comes complete with pre-drilled PVC piping, cement, wire, valves, filters, nozzles...
 
Sales price: $549.99
SKU: PHY-1320
 
 
 
 
 

Phytotronics Misting Kit, 150' with 3/4” PVC

These Misting Kits have everything you will need to set up an effective misting system in your greenhouse. Each kit comes complete with pre-drilled PVC piping, cement, wire, valves, filters, nozzles...
 
Sales price: $599.99
SKU: PHY-1325