Extech Oscilloscope 100MHz 2 Channel Digital Handheld - MS6100
Extech Oscilloscope 100MHz 2 Channel Digital Handheld - MS6100
Extech Oscilloscope 100MHz 2 Channel Digital Handheld - MS6100
Extech Oscilloscope 100MHz 2 Channel Digital Handheld - MS6100

Extech Oscilloscope 100MHz 2 Channel Digital Handheld - MS6100

SKU: MS6100
Product Weight 4.00 Pounds
This 2 channel digital handheld oscilloscope has a bandwidth of 100MHz and a storage and replay function. Also comes with PC interface for further analysis and manipulation of data.
Sales price $1,999.99

Extech Oscilloscope 100MHz 2 Channel Digital Handheld - MS6100

With a 5.7” (144mm) color LCD display simplifies viewing multiple waveforms and a 100MHz bandwidth



  • One-touch automatic setup optimizes the position, range, timebase and triggering to assure a stable display of virtually any waveform
  • Easy to use pop up menu with built-in multi-language help system
  • 100MHz bandwidth
  • 23 automatic measurements
  • Store and recall up to 1000 waveform screens and setups using the installed 2G microSD card
  • Automatic cursor tracking measurements
  • XY Mode
  • Built-in FFT function converts a time-domain signal into its frequency components to measure harmonic content and distortions in systems
  • Waveform Recorder to capture/replay input waveforms from CH1 and CH2 with a maximum record length of 1000 frames
  • Pass-Fail function compares a stored waveform to an unknown input
  • Waveform math abilities include addition, subtraction, multiplication and division
  • Average Mode for smoothing waveforms
  • Square Wave Output (2V, 1kHz) for probe adjustment
  • 6,000 count multimeter with analog bargraph
  • Comes complete with two 1X/10X oscilloscope probes, test leads, Windows compatible software and USB cable, universal AC adaptor and a carrying case
  • USB interface and PC software for transferring waveforms and data to your PC for further analysis and manipulation

The most common application of an oscilloscope is for troubleshooting malfunctioning electrical equipment. This is done by “probing” an electrical component for an expected signal. If the signal matches what is expected the equipment is working correctly, if a flawed or non-existent signal is received then the equipment is malfunctioning. This oscilloscope comes with a waveform recorder to capture and replay input waveforms from both channels with up to 1000 frames of recording length.

ExtechCatalog38-sAn oscilloscope produces a graphical display of constantly varying signal voltages. With time as the X axis and voltage as the Y axis you can measure practically any signal which can be converted to a voltage. Oscilloscopes are vital to electronic testing, medical applications, engineering and telecommunications.

Progressive signal probes are used to isolate faults in the electronics which are then fixed and isolation of other faults can begin. Another use of an oscilloscope is to test newly designed circuitry. Problems with these include bad design, incorrect voltages and electrical noise. The storage capacity of this oscilloscope is useful for tracing unusual waveforms and unexpected events usually found when troubleshooting new circuitry. A skilled technician can sometimes determine the offending component based purely on the picture developed.

This hand-held oscilloscope is ideal for field applications and testing of audio-frequencies. With a rugged outer casing and a dual channel display the comparison of differing waveforms has never been easier. With a rugged carrying case to safely transport to any job site.

This oscilloscope also features the functioning of a Multimeter, being able to test AC and DC Voltage and Current, Resistance, Capacitance, diode and continuity. This instrument is easily connected to a PC for further analysis and manipulation of the data.


  • Oscilloscope Functions
    • Bandwidth: 100MHz
    • Real time sample rate: 1GS/s
    • Risetime: 3.5ns
    • Glitch Capture: 2.5ns
  • Common Oscilloscope Functions
    • Record Length: 1M points per channel
    • Display size: 5.7" (144mm) color LCD; 640 x 480 pixels
    • Channels: 2
    • Vertical Sensitivity: 2mV to 5V/div
    • Vertical Resolution: 8 bits
    • Timebase Range: 2ns to 2000s/div
    • Sample mode: Normal, Average, Peak Detect
    • Trigger modes: Edge, Pulse, Alt, Video
    • Trigger source: CH1, CH2
    • Trigger coupling: AC, DC
    • Input impedance: 1MΩ/15pF
    • Max input voltage: 300V (peak)
    • Cursor measurement: Voltage and time; Delta (CH1-CH2)
  • Common True RMS Multimeter Functions
    • AC Voltage: 60mV, 600mV, 6V, 60V, 600V
    • DC Voltage: 60mV, 600mV, 6V, 60V, 600V, 800V
    • AC and DC Current: 60mA, 600mA, 10A
    • Resistance: 600Ω, 6kΩ, 60kΩ, 600kΩ, 6MΩ, 60MΩ
    • Capacitance: 5nF to 400μF
    • Diode/Continuity: Yes
    • PC Interface: USB Cable
    • Power Supply: 3 hours Li-ion rechargeable battery; AC Adaptor/Charger
    • Dimensions: 9.6 x 6.4 x 2" (245 x 163 x 52mm)
    • Weight: 2.6lbs (1.2kg)

Unit Ship Weight: 4 lbs



There are yet no reviews for this product.