Horiba Copper Ion Electrode – 8006-10C
Horiba Copper Ion Electrode – 8006-10C
Horiba Copper Ion Electrode – 8006-10C
Horiba Copper Ion Electrode – 8006-10C
 

Horiba Copper Ion Electrode – 8006-10C

SKU: 9003016000
 
Product Weight 1.00 Pounds
This electrode determines the copper ion concentration in aqueous solutions. The measurement range is 0.06 to 6,350 mg/L Cu2+.
Print
 
Sales price $544.99
 
 
 
 
 
 
 
 
 
 

Horiba Copper Ion Electrode – 8006-10C

 

8006-10C_06-sThe Horiba Copper Ion Electrode is designed to determine the copper ion concentration in aqueous solutions. It requires the 2565A-10T reference electrode to function properly which can be found on our website. This electrode can be used with the majority of Horiba water testing meters and provides highly accurate, repeatable results.

 

Horiba sensors and electrodes are among the highest quality in the world. They are made with top quality components and are designed to provide accurate, dependable results.

 

Specifications:

 

Measuring range

0.06 to 6,350 mg/L Cu2+
(10-6 to 10-1 mol/L) Cu2+

pH range

6.35 mg/L (10-4 mol/L) Cu2+
pH 2 to 6

Applicable temperature range

0 to 50

Response time (90%)

Within 10 seconds

Applicable reference electrode

2565A

Selection coefficient

Fe2+ = 0.1
Ni2+、Na+ = 1,000

• The response time is the time which is required to reach 90% response when the ion concentration is gradually changed from 10-4 mol/L to 10-2 mol/L with the solution stirred.
Exception:
*1: 90% response when ion concentration is changed to 10-6 mol/L 10-2 mol/L
*2: 95% response when ion concentration is changed to 10-3 mol/L ∼ 10-1 mol/L
*3: 95% response when ion concentration is changed to 10-4 mol/L ∼ 10-2 mol/L
*4: 95% response when ion concentration is changed to 10-4 mol/L ∼ 10-1 mol/L

• The selection coefficient is a ratio of the limit concentration of coexisting ions (mol/L) to the ion concentration to be measured (mol/L); The value of 1000 means that the coexisting ions can be permitted up to 1000 times the ion measured and ''not acceptable'' means that chemical change occurs in the solid response membrane.

Note: This electrode does not work with the Horiba D-53 meter.

Unit Ship Weight: 1 lb

 

Reviews

There are yet no reviews for this product.