Agritape Heating Mat with Ground Screen, 44" Width 10' Length

SKU: KB-70136-900
 
Product Weight 8.00 Pounds
Get your seedlings off to a perfect start with the Agritape propagation kit which includes a 44" wide by 10’ mat and screen. Comes with a ground screen to protect the mat and safely ground it. Rated at 20 watts per sq.ft.
Print
 
Sales price $199.99
 
 
 
 
 
 
 
 
 
 

Agritape Heating Mat with Ground Screen, 44" Width 10' Length

 

Features:agritapescreen-s

 

  • Even Heat Distribution
  • Rated at 20 watts per sq.ft. 
  • Surface temperature 85-95 degrees F
  • Can raise soil temperature by up to 20 degrees F over ambient air temperature (therefore room temps should be kept 50 degrees F or higher)
  • 1 Year Limited Warranty
  • Includes a ground screen which helps to ground the heating mat
  • Ground screen helps to prevent physical damage to the heating mat and holds it to growing benches more securely
  • Energy Efficient and Easy to Use
  • Ideal for early germination and season extension

Get your seedlings off to a perfect start with this Agritape propagation kit which includes the Agritape heating mat and a protective ground screen. We believe that Agritape is one of the best brands out there for bottom heating as they are known for their high quality design, durability and affordability. Each kit comes with a 1 year limited warranty. 

 

This heating mat includes a ground screen which is designed to safely ground the mat in the event of damage. A ground screen serves to protect the Agritape from physical damage and safely grounds the current if the tape is penetrated. It also draws off static electrons that collect on the surface of the tape. It is placed over the heating mat and is connected to the ground wire from the control unit.

 

You will also need a 20 or 13 Amp control to use with this product (sold seperately). The mat heats up when it is electrified with standard house current (110 volts AC) and will generate a surface temperature approximately 85-95 degrees.

 

Installation instructions:

 

  1. Roll out the Agritape  and plug it into the control unit (thermostat).
  2. Cover the Heat Mat with the ground screen.
  3. Connect the ground wire from the control unit to the screen.
  4. Plug in the control unit and place the bulb thermostat in the soil of the seed tray or container.
  5. Set the dial to the desired soil temperature.

Note: Insulation board may be installed under the Heat Mat to improve thermal efficiency. (Optional)

 

Unit ship weight: 8 lbs

 

Reviews

There are yet no reviews for this product.