Agtec 40mil RPE Pond and Containment Geomembrane Liner (Custom Size)
Durable, and versatile, these heavy-duty liners can be used for water, oil and waste containment, construction covers, drainage and irrigation lining, landscaping and more. 7+ years of UV resistance.
Agtec 40mil RPE Pond and Containment Geomembrane Liner (Custom Size)
Features:
- Designed for below grade water and waste containment
- Super Strength
- Double scrim reinforced polyethylene (RPE)
- UV resistant material retains over 90% strength after 2000 hours of direct sunlight
- Hydrocarbon stable
- Excellent hydrostatic resistance of 685 psi
- Puncture resistant up to 347 lbs
- Ideal for low temperature applications - resists cracking down to -85º F
- Made in the U.S.A.
Applications include: pond /lake / stream and waterway liners; manure and field / hay covers; wastewater / irrigation containment; containment for lagoons, fish farms and dams; construction covers; landscaping water features (golf hazards, waterfalls, etc); catch basin construction; oil and mining pit containment; weed elimination; vapor barriers
Guidelines for Calculating Liner Dimensions
This method works best for ponds with a relatively uniform depth. For irregular shapes and significant depth variations, you may need to perform additional measurements.
First, you will need to know the length, width, and depth (height) of your pond. If you’re not sure, begin by taking measurements at the longest point, the widest point, and the deepest point.
To calculate your liner’s width, multiply the height of the pond x 2 as the liner will have to go down one bank and back up again on the other. Add this number to your pond’s width. We recommend adding an additional 4’ (2’ on each bank) to go above the ground and anchor the liner.
Repeat the process to calculate your liner’s length. Multiply the height of the pond x 2 and add this number to your pond’s length. Add an additional 4’ to go above the ground and anchor the liner.
Liner Width = (Hole Height x 2) + Hole Width + 4’.
Liner Length = (Hole Height x 2) + Hole Length + 4’.
Specifications:
- Description: black 16 x 16 count per inch
- Weight: 18.5 oz./sq.yd. (+/-5%) - ASTM D751
- Thickness: 40 mils (+/-10%) - ASTM D1777
- Coating thickness: 2.5 mils each (+/-10%)
- Tensile strength (grab method): md 680 lbs., td 650 lbs. - ASTM D7004
- (strip method) md 460 lbs., td 450 lbs. - ASTM D7003
- Tear strength (tongue method): md 150 lbs/inch, td 155lbs/inch - ASTM D5884
- Bursting strength (mullen): 1250 psi ASTM D751
- Hydrostatic resistance: 685 psi ASTM D751
- Puncture resistance: 347 lbs. ASTM D4833
- Low temperature cold crack: -85º f ASTM D2136
- Seam strength (shear), min.: seam shear should be >80% of the strip tensile of the base fabric - ASTM D7747
- Seam strength (peel), min.: 4lbs/inch - ASTM D413
- Carbon black content: 3% - ASTM D4218
- Carbon black dispersion: Category 1 - ASTM D5596
- Uv resistance: >90% strength retained after 2000 hrs - ASMT G151
**Note: This liner is custom cut and cannot be returned. Please allow 5-7 business days processing time before shipping.
Ship Weight: 0.15 lb/square foot
Specifications:
- Description: black 16 x 16 count per inch
- Weight: 18.5 oz./sq.yd. (+/-5%) - ASTM D751
- Thickness: 40 mils (+/-10%) - ASTM D1777
- Coating thickness: 2.5 mils each (+/-10%)
- Tensile strength (grab method): md 680 lbs., td 650 lbs. - ASTM D7004
- (strip method) md 460 lbs., td 450 lbs. - ASTM D7003
- Tear strength (tongue method): md 150 lbs/inch, td 155lbs/inch - ASTM D5884
- Bursting strength (mullen): 1250 psi ASTM D751
- Hydrostatic resistance: 685 psi ASTM D751
- Puncture resistance: 347 lbs. ASTM D4833
- Low temperature cold crack: -85º f ASTM D2136
- Seam strength (shear), min.: seam shear should be >80% of the strip tensile of the base fabric - ASTM D7747
- Seam strength (peel), min.: 4lbs/inch - ASTM D413
- Carbon black content: 3% - ASTM D4218
- Carbon black dispersion: Category 1 - ASTM D5596
- Permeability:
- Uv resistance: >90% strength retained after 2000 hrs - ASMT G151