Agtec Fastlink Wire Coupler and Wire Terminator - Pack of 20 (Choose Size)
These wire fasteners are heavy duty, no-slip, and easy to use for joining multiple sizes and types of wire.
Agtec Fastlink Wire Coupler
Features:
- Small: fits wires SWG 17.5ga - 12.5ga (.05in - .099in /1.3mm - 2.5mm) - Use with our 12.5ga Agtec Monofilament
- Medium: fits wires SWG 13.5ga - 9.5ga (.087in - .137in / 2.2mm - 3.5mm) - Use with our 12.5ga Agtec Monofilament
- Large: Fits wires SWG 9.5ga - 4.5ga (0.138in -0.217in / 3.5mm - 5.5mm) - Use with our 8ga Agtec Monofilament Monofliament.
- Zinc alloy housing and roller teeth
- Stainless steel springs
- Metric and imperial wire diameters
- Reusable
- For use with multiple wire types and sizes
- Use with Electric Fencing with no break in current*
- Can be used with high tensile monofilament, wire rope, and barbed wire
Easily join together and tighten two segments of wire fencing or monofilament wire with this durable coupler.
Also use to create a loop with monofilament or wire which can wrap around an anchor post or a smaller loop that can be used onto a hooked anchor to terminate the wire.
To use, simply insert the ends of two wire segments into the holes. The Fastlink joiner latches to the wire and will not allow it to slip back out again. Pull to tighten. Easily remove and replace by cutting the wire and pulling it entirely through.
*Take precautions when working with electric fence wire. When installing make sure electric current is off, and follow the instructions listed in your manual.
