Agtec 30mil RPE Pond and Containment Geomembrane Liner (Custom Size)
Line your pond or water feature with these durable black liners. Intended for below grade water oil and waste containment, these versatile liners can also serve as tarps, irrigation lining, and temporary erosion control. 7+ year UV resistance.
Agtec 30mil RPE Pond and Containment Geomembrane Liner (Custom Size)
Features:
- For below grade water and waste containment
- UV resistant material retains over 90% strength after 2000 hours of direct sunlight
- 15 year exposed UV product
- Hydrocarbon stable
- Single scrim laminated LDPE with LLDPE film
- Excellent hydrostatic resistance of 610 psi
- Puncture resistant up to 202 lbs
- Ideal for low temperature applications - resists cracking down to -85º F
- Made in the U.S.A.
Applications include:
- Pond/lake/stream lining
- Manure covering
- Oil/Gas/Mining containment
- Water containment
- Sports Field and Turf drainage
- Bio-swale containment
- Temporary erosion control
- Canal/Ditch lining
- Potable Water
- Not intended for above-ground containment
Guidelines for Calculating Liner Dimensions
This method works best for ponds with a relatively uniform depth. For irregular shapes and significant depth variations, you may need to perform additional measurements.
First, you will need to know the length, width, and depth (height) of your pond. If you’re not sure, begin by taking measurements at the longest point, the widest point, and the deepest point.
To calculate your liner’s width, multiply the height of the pond x 2 as the liner will have to go down one bank and back up again on the other. Add this number to your pond’s width. We recommend adding an additional 4’ (2’ on each bank) to go above the ground and anchor the liner.
Repeat the process to calculate your liner’s length. Multiply the height of the pond x 2 and add this number to your pond’s length. Add an additional 4’ to go above the ground and anchor the liner.
Liner Width = (Hole Height x 2) + Hole Width + 4’.
Liner Length = (Hole Height x 2) + Hole Length + 4’.
Specifications:
- Description: black 12 x 12 count per inch
- Weight: 15.6 oz./sq.yd. (+/-5%) - ASTM D751
- Thickness: 30 mils (+/-10%) - ASTM D1777
- Coating thickness: 5.5 mils each (+/-10%)
- Tensile strength (grab method): md 345 lbs., td 420 lbs. - ASTM D7004
- (strip method) md 235 lbs., td 300 lbs. - ASTM D7003
- Tear strength (tongue method): md 50 lbs/inch, td 55lbs/inch - ASTM D5884
- Bursting strength (mullen): 700 psi ASTM D751
- Hydrostatic resistance: 610 psi ASTM D751
- Puncture resistance: 202 lbs. ASTM D4833
- Low temperature cold crack: -85º f ASTM D2136
- Seam strength (shear), min.: seam shear should be >80% of the strip tensile of the base fabric - ASTM D7747
- Seam strength (peel), min.: 4lbs/inch - ASTM D413
- Carbon black content: 7.5% - ASTM D4218
- Carbon black dispersion: Category 1 - ASTM D5596
- Uv resistance: >90% strength retained after 2000 hrs - ASMT G151
*Note: Not intended for above-ground containment. For above ground installation or harsh chemical containment we recommend using the Agtec polypropylene liner.
**Note: This liner is custom cut and cannot be returned. Please allow 5-7 business days processing time before shipping.
Ship Weight: 0.112 lb/square foot
Specifications:
- Description: black 12 x 12 count per inch
- Weight: 15.6 oz./sq.yd. (+/-5%) - ASTM D751
- Thickness: 30 mils (+/-10%) - ASTM D1777
- Coating thickness: 5.5 mils each (+/-10%)
- Tensile strength (grab method): md 345 lbs., td 420 lbs. - ASTM D7004
- (strip method) md 235 lbs., td 300 lbs. - ASTM D7003
- Tear strength (tongue method): md 50 lbs/inch, td 55lbs/inch - ASTM D5884
- Bursting strength (mullen): 700 psi ASTM D751
- Hydrostatic resistance: 610 psi ASTM D751
- Puncture resistance: 202 lbs. ASTM D4833
- Low temperature cold crack: -85º f ASTM D2136
- Seam strength (shear), min.: seam shear should be >80% of the strip tensile of the base fabric - ASTM D7747
- Seam strength (peel), min.: 4lbs/inch - ASTM D413
- Carbon black content: 7.5% - ASTM D4218
- Carbon black dispersion: Category 1 - ASTM D5596
- Uv resistance: >90% strength retained after 2000 hrs - ASMT G151