Agtec 45mil RPP Pond and Chemical Containment Geomembrane Liner (Custom Size)

Features:

• Impermeable liner is ideal for water and waste containment
• Can be used for above ground containment unlike polyethylene liners which may weep
• UV resistant material retains over 90% strength after 8000 hours of direct sunlight
• Hydrocarbon stable
• Hydrostatic resistance of 450 psi
• Puncture resistant up to 120 lbs
• Ideal for low temperature applications - resists cracking down to -50º F
• 3 Layer plastic, 13 mil each
• 20 Year exposed UV lifespan
• NSF-61 certified
• Made in the U.S.A.

This Agtec polypropylene waterproof liner is versatile and heavy duty. Due to its elasticity, polypropylene is more suitable for above ground water containment than polyethylene. Polyethylene liners are very slightly permeable and transmit moisture or vapor more readily in the form of condensation than polypropylene liners. Polypropylene’s excellent impermeability and high chemical resistance also makes it an excellent choice for important containment applications such as above ground chemical containment and municipal waste treatment plants. 

Extending its application to secondary containment in the Oil and Fuel industries, our 45mil  Liners are ideal. Complying with the EPA's Spill Prevention Control and Countermeasures (SPCC), these liners offer an unparalleled solution for handling leaks or spills. Facilities with oil-filled equipment benefit from the necessity of secondary containment for oily wastewater, and any location storing or handling fuel requires the assurance of secondary containment.

Manufactured in very large single panels in order to minimize seams, they are ideal for very large applications such as waterway liners, and also for smaller projects like a backyard ponds or water features.  Fish and plant safe. UV stabilized.

Applications include:

• Above ground chemical containment
• Cistern Liners
• Municipal waste containment
• Long-term Irrigation reservoir
• Pond/lake/stream and waterway liners;
• Manure and field/hay covers;
• Slurry ponds
• Athletic field drainage;
• Wastewater / irrigation containment; 
• Containment for lagoons, fish farms and dams;
• Potable water containment;
• Temporary waterproof covers;
• Landscaping water features (golf hazards, waterfalls, etc);
• Catch basin construction;
• Oil and mining pit containment;
• Weed elimination;
• Living roof lining;
• Vapor barriers
• Baffle Curtains

Guidelines for Calculating Liner Dimensions

This method works best for ponds with a relatively uniform depth. For irregular shapes and significant depth variations, you may need to perform additional measurements.

First, you will need to know the length, width, and depth (height) of your pond. If you’re not sure, begin by taking measurements at the longest point, the widest point, and the deepest point.

To calculate your liner’s width, multiply the height of the pond x 2 as the liner will have to go down one bank and back up again on the other. Add this number to your pond’s width. We recommend adding an additional 4’ (2’ on each bank) to go above the ground and anchor the liner.

Repeat the process to calculate your liner’s length. Multiply the height of the pond x 2 and add this number to your pond’s length. Add an additional 4’ to go above the ground and anchor the liner.

Liner Width = (Hole Height x 2) + Hole Width + 4’.

Liner Length = (Hole Height x 2) + Hole Length + 4’.

Specifications:

• Description: Reinforced polypropylene liner single scrim - low temperature black 9 x 9 Polyester scrim.
• Weight:
• Thickness: 45 mil (+/-10%)
• Coating thickness: 13 mil each (+/-10%)
• Tensile strength (grab method): 250 lbs. - ASTM D7004
• Elongation to break: Warp 25% - ASTM D7004
• Tear strength (tongue method): Warp 100 LBS/FT - ASTM D5884
• Dimensional stability (% Change Max): 1% - ASTM D1204
• Bursting strength (mullen): 450 psi ASTM D751
• Hydrostatic resistance: 450 psi ASTM D751
• Puncture resistance: 120 lbs. ASTM D4833
• Water vapor permeance: 0.05 ASTM E96
• Water absorbtion (30 day): 0.05 ASTM D471
• Low temperature cold crack: -50º F ASTM D2136
• Uv resistance: >90% strength retained after 8000hrs - ASMT G151

**Note: This liner is custom cut and cannot be returned. Please allow 5-7 business days processing time before shipping.

Ship Weight: 0.15 lb/square foot