Agtec Trellis Support Netting 80in x 328ft Roll
Agtec trellis netting can be used as a vertical or horizontal support for crops and flowers as they grow. Very thin 8g/sqm yet extremely strong. UV Stabilized for long life. Mesh size 6" x 7".
Agtec Trellis Support Netting 80" x 328' Roll
- 80" x 328' or 2m x 100m
- Double reinforced edges
- UVA stabilized Polypropylene
- Resistant to chemicals
- Light in weight - easy to handle
- Thin 8g/sqm but extremely strong
- Rolled onto a cardboard core for faster and easier unrolling
- Improves plant exposure to light and air
- Mesh size approximately 6" x 7"
Maximize use of space, and make harvesting easier with this white lightweight, durable, polypropylene mesh. It's strong, easy to install, will not rot, rust or mold, and lasts for years. The double reinforced edges provide strength, edge visibility and tensioning by helping to contain your support cable.
By improving air circulation, exposure to sunlight, and reducing ground contact, Agtec trellis netting helps reduce the risk of plant damage due to mold, bacteria and fungus, and encourages plant growth.
This vertsitile UV stabilized netting can be used vertically to support growing vegetables like peas, tomatoes, pole beans and cucumbers and other plants that will grow to attach themselves to the net. Also, it can be layered horizontally above garden beds to support plants as they grow up through the netting. Great for garden beds and medical marijuana growing. It provides perfect support for fragile flowers and stems and adds a very strong support structure ideal for growing healthy plants.
To install vertically, stake support posts down your rows at approximately every 24' apart. Attach netting to the support posts using string or twine. Install a support cable such as monofilament support wire (available separately) or other strong cable or string through the netting at the top for further support. Then simply tie your plants to it as they grow.
To install horizontally stake 4 or more posts in the ground. The first 2 should be placed in the ground the width of your netting, the remainder should be placed opposite eachother every 6 - 20'. Screw or bolt wooden cross bars between opposing posts and at the different heights you are going to space your layers of trellis support. The appropriate height of the posts will vary depending on the type of plants. Next attach your netting to the cross bars with string, staples or zip ties to hold in place, and unroll to the next crossbar to attach. Repeat for additional layers. For smaller plants such as flowers use several layers close together.
The netting is very versatile and there are many ways you can install this to support your plants such as putting over a hoop house or tunnel so that the crops beneath them grow through.
Monofilament or string may be used to strengthen the edges and minimize sagging.
Unit Ship Weight: 5 lbs